Ledgers

Related products

• 

  Read more

  Kwikstage Standards

  The vertical member of the scaffold has a spigot at one end for accurate alignment and hole for bolting if required. The part is painted (can also be galvanized depending on the customer’s requirement), the quality and the depth of the paint is maintained which ensures that part aesthetically and functionally is resistant to damage which can occur due to site use. For the attachment of ledgers, transom and auxiliary components, a series of V- location lugs are welded on the outside of the tube. Open end standards and loose spigots are also available for the same application.

  Product Code	Size (Mtr)	Weight (Kg)
  0STSSD011G	3.0	17.82
  0STSSD014G	2.5	14.80
  0STSSD012G	2.0	12.13
  0STSSD015G	1.5	09.28
  0STSSD013G	1.0	06.50
  0STSSD066G	0.5	03.60

  Read more
• 

  Read more

  Transoms

  Transoms is a T- section which is using standard 50 X 50 Angle, also has a wedge “banana type” of fixing at each of its end as the ledger the same fixes in the “V” locating lugs in a transverse direction, fixing the inner and outer standards. This can carry 3 or 5 steel or timber boards and toe board. Technocraft Scaffolding division manufactures two types of TRANSOM for specific uses.

  Product Code	Size (Mtr)	Weight (Kg)
  0STSTR042G	2.4 (5.0mm thk)	23.00
  0STSTR043G	1.8 (5.0 mm thk)	17.30
  0STSTR049G	1.2 (4.0 mm thk)	08.20
  0STSTR047G	0.7 (4.0 mm thk)	05.20
  0STSTR048G	0.5 (4.0 mm thk)	04.00

  Read more
• 

  Read more

  Diagonal brace (face brace)

  The purpose of the diagonal brace or face brace is to provide rigidity and strength to the entire scaffold. It is use to the full height of the scaffolding in a longitudinal direction.

  Product Code	Size (Mtr)	Weight (Kg)
  0STSDB001G	3.6	13.70
  0STSDB004G	3.2	12.60
  0STSDB002G	2.7	10.90
  0STSDB005G	2.1	08.30
  0STSDB003G	1.7	07.30

  Read more
• 

  Read more

  Adjustable base jack (Solid Screw)

  The following allows accurate levelling of the entire scaffold on uneven ground. Its also helps to provide infinite adjustment on sloping ground too. The safe working load (S.W.L) recommended is 57 KN.

  Product Code	Size (Mtr)	Weight (Kg)
  0STSAJ001E	ᴓ 36.0 X 710	06.60

  Read more